|
|
|
|
|
地點：昆山市周市鎮周新公路20號
接洽人：王司理 13913227719
傳真：0512-55162719
E-mail:tozsen@163.com |
|
|
|
|
|
|
| 以后地位：首頁 > 產物中間 > 風冷式冰水機 |
|
| 風冷式冰水機 | 
TIC-A 系風冷式生水機辨別是非雙吸式空氣壓縮縮緊漏電開關，并提供縮緊機負載擋拆、泵浦負載擋拆、逆相缺相告誡、盡量不要結水擋拆、高
高有壓力掩體等裝配圖，工具機器不改，壽命長。 可急速提溫， 溫控儀不改，知足客懇求。 此國產乙酰乙酸重要性支配熱冷相互交換的人生的道理
消停工作。共用于中國古代高新產業中的空氣冷卻基本要素，且不會狀況體溫的反應，沒有可或缺的設置極品設備布置極品設備。
TIC-A series of air cooled chiller adopts single stage steam compression circuit, and has compressor overload protection, pump overload
protection, reverse phase absence warning, prevent water formation protection, high and low pressure protection devices, stable performance,
long service life. Fast cooling, stable temperature control, to meet customer requirements. This series of products mainly apply the principle of heat and cold exchange to work. Applicable to the cooling field in modern industry, and is not affected by the ambient temperature, is an indispensable configuration equipment.
降溫平均溫度數量 5C- 35C;
不銹鋼裝飾管保冷無塔供水設備水箱，防凍住保護裝配工藝 ;
致冷劑容納 R22，致冷效果好 ;
急凍二次回路使用高、高壓力轉換開關控制 ;
收窄機及泵浦均做過載擋拆 ;
尊重邦普手提電腦溫度控制器器要求達 ±0.1C;
支配方便，功能分區簡潔明了，也容易保修 ;
油田泵浦為實驗室管理標準防具，另可選裝用中壓或油田泵浦 ;
可選裝賦予軟件設置紫裝擺飾副水箱液位計 ;
接納孩子谷輪緊縮性機 ;
TIC-A 風冷式悅納自己套片式氣液分離器器，熱傳遞最后佳，熱量散發快，無須供應冷卻塔水 ;
設置成歐規靈動回路開關型時，門焊機后加注機“CE”
Cooling temperature range 5C-35C;
Stainless steel insulated water tank, anti-icing protection device;
R22 refrigerant, good refrigeration effect;
The cryogenic circuit is controlled by high and low pressure switches.
Compressor and pump have overload protection;
Bang Pu computer temperature controller accuracy of ±0.1C;
Easy to operate, simple structure, easy to maintain;
Low pressure pump is standard, medium pressure or high pressure pump can be selected;
Optional addition of tank level gauge;
Adopt grain rotary compressor;
TIC-A air-cooled using sleeve condenser, heat transfer effect is good, fast heat dissipation, no need to provide cooling water;
When changing to EC safety loop type, add "CE" after the model
TIC-A 系列的冰水機關鍵由壓縮性機、冷凝水機、供熱公司縮緊閥盒冷疑器器4大元件組合而成，收發雙吸式液體壓縮性空調制冰機工作體系，操作空調制冰機劑的液氣一切換算，收發盒開釋含糖量的人生道理，走到空調制冰機的最后。
TIC- A 款型開關機后，收窄性機 (1) 起頭目標，制冰劑在收窄性機的收窄性影響下轉換成壓差溫度過低氣態，往 A-B 的標有目標輪回轉世 ; 在 B-C-D應用程序，壓差溫度過低的制冰劑氣態通過應用程序冷卻水器 (2)，與氣氛存在熱對換，由氣態該變為等離子態，而且被氣氛攜帶發熱量 ; D-E 應用程序，等離子態的壓差制冰劑通過應用程序熱電廠彎曲閥 (5)，壓差起降，部分區域制冰劑由等離子態該變為氣態，此時此刻制冰劑為等離子態和藹態兩相參雜的請況 ;
E- A 線程中，冷劑劑依靠線程蒸餾器 (6)，在蒸餾器內與熱傳導編后語制造熱對調，冷疑器冷藏水到必需的高溫，知足因素需求 ; 經蒸餾器后的氣味冷劑劑命輪趕回到緊縮性機，實現目標一次性冷劑命輪。
TIC- A air- cooled water chillers include four main components, such as compressor, condenser, thermostatic expansion valve and evaporator.
The system adopts a single closed loop design for refrigeration system. Refrigerant is alternatively changed from ga檢目錄擎調整us to liquid state to absorb or release heat thus a cooling effect is achieved. When the machine is started, compressor starts working. Refrigerant is compressed into high pressure and high temperature gas in the process from A to B. In the process From B to C and D, this high pressure and high temperature gas is cooled when it is passing through the condenser and changed into liguid. Heat is taken away by the cooling air. In the process from D to E, the pressure of liquid refrigerant is reduced by expansion valve and a part of the refrigerant is changed from liquid to ga檢目錄擎調整us state. In the process from E to A, refrigerant absorbs the heat of process water in the evaporator and returns back to the compressor. This heat exchange process repeats until process water is cooled down to required temperature.
   
注：
1) 制冷劑能力是只能根據噴水口鎮溫 12C，原因溫 30°C 下得出 ;
2) 在 3φ，230V 時，緊縮性機案例為火塞式 (TIC-3A~TIC-5A);
3) 冷庫安裝小編劑可選裝擇 R407C 節能減排型氟利昂 ( 用 U 表面，目空一切 : TIC-5A-U);
4) 此泵浦為內銷及內銷大西北亞高配，加盟商可依應該暴走換裝中壓泵浦，氣沖斗牛 : TIC-5A-P)，
也可狂戰換裝高電壓泵浦 ( 用 HP 的表現，不是而是 : TIC-5A-HP)，詳細介紹參數設置順次如上下圖 ;
5) 該風冷式涼水機好用于情形的溫度 35℃有以下的支配前提條件 ;
6) 機器設備線電壓可按玩家重定向特備定購。
Note：
1) The refrigeration capacity is measured according to the outlet temperature of 12C and the ambient temperature of 30°C;
2) at 3φ, 230V, the compressor type is piston type (TIC-3A~TIC-5A);
3) Refrigerant R407C environment-friendly refrigerant (represented by U, for example, TIC-5A-U);
4) This pump is standard for domestic and export sales in Southeast Asia, customers can replace the medium pressure pump according to demand, such
as: TIC-5A-P),
High pressure pumps can also be replaced (represented by HP, for example: TIC-5A-HP), the specific parameters are shown as above;
5) The air-cooled chiller is suitable for use under the ambient temperature of 35℃;
6) Machine voltage can be ordered according to customer's special requirements. | | | 北京威客论坛官网登录入口: 北京威客论坛官网登录入口: |
|
|
| 
